MPTOOL Error Code List N0109.pdf - MP

It sounds like Drive2 is failing and will need to be replaced. I would be very nervous about rebuilding a RAID5 made up of 3TB disks.

[Решено] sm3257ENQAA Выдаёт ошибку Bad block over setting 11 или Format fail 06. Автор panamaboot, 04 Марта 2012, 18:48:48. 0 Пользователей и 1 Гость ...

Usually punctured block means that corrupted bad block have been copied from failed disks to healthy disks.

... Error Bits Over Fail Error Bits Are Too Much Over Threshold 0x11 Bad block over Setting Total bad block over the BBOption. 0x12 Check Open ...

When I try to create the Xebuild image j runner throws out tons of Bad LBA at block... errors and then crashes every time after a few seconds.

This article describes what actions might be taken when smartmontools detects a bad block on a disk. It demonstrates how to identify the file associated with ...

then I did 'Multiple Erase All' and lost my access to usb drive and capacity of drive went 0GB. My chipset info didn`t change ...

0x11, Bad block over Setting, Total bad block over the BBOption. 0x12, Check Open/Short Fail, Check Open/Short Fail. 0x13, Pre-scan Early Bad Fail, Pre-scan ...

ECC bias address [06] means indicates a bad block mark. For NAND Flash (8bit), the bad block mark is usually saved in 6th byte on the first and second page of ...

Using MTTY shows a few bad blocks, but not sure if they are related to this problem. Anybody with clues as to what's going on or how to fix? I'm ...